Free CSSBB Exam Study Guide for the NEW [Mar-2026] Dumps Test Engine
CSSBB PDF Dumps Extremely Quick Way Of Preparation
What is the duration of the CSSBB Exam
- Length of Examination: 4 hour 30 minutes
- Number of Questions: 165
- Format: Multiple choices, multiple answers
How much CSSBB Exam Cost
The price of the CSSBB exam is $538 USD.
Exam Details
All in all, the CSSBB exam takes place in two different delivery modes which include computer-based testing (CBT) and the paper-based one. Both of them involve multiple-choice items and are aimed at testing the candidates' level of understanding of the CSSBB Body of Knowledge (BoK). As for the CBT mode, the exam has only one part containing 165 questions and is conducted in the English language only. Moreover, 15 items out of 165 are unscored inquiries. The total amount of time allotted for the computer-delivered test is 4 hours and 18 minutes. As for the second mode (the PBT evaluation), the exam also has one part and is offered in English too. However, it contains 150 questions in total, involves a four-hour period of time, and may be offered in other languages such as Mandarin and Spanish in certain high-demand locations.
NEW QUESTION # 154
If the value of the test statistic had been 0.185, what action should have been taken regarding the null hypothesis?
- A. none of the above
- B. accepted
- C. all of the above
- D. rejected
Answer: A
NEW QUESTION # 155
After a team has engaged in diversion activities they may need to employ a tool for conversion. Examples of such a tool are: I. nominal group technique II. multivoting III. cause and effect diagram IV. activity network diagram V. matrix diagrams
- A. III and IV
- B. IV and V
- C. II and III
- D. I and II
Answer: D
NEW QUESTION # 156
The most appropriate type of FMEA for a product before going into manufacturing is a ___________ FMEA.
- A. Test Process
- B. Design
- C. Consumer
- D. Survey
Answer: B
NEW QUESTION # 157
If a process has subgroups for Variable data and the process runs for a long period of time, then the best pair of SPC Charts to use would be an Xbar and _________.
- A. C Chart
- B. Individuals Chart
- C. R Chart
- D. NP Chart
Answer: C
NEW QUESTION # 158
For the data set shown here which of these statements is/are true?
- A. Grade A has a higher sample Mean than Grade B
- B. Grade A has the lowest sample Mean of the 3 samples
- C. Hypothesis Testing of Means or Medians cannot be done since there are an unequal number of observations for the 3 samples
- D. A Paired T-test would be applicable for comparing Grade B and Grade A since they follow each other in the data set
Answer: B
NEW QUESTION # 159
A valid Multiple Linear Regression (MLR) is characterized by all of these except _______________________.
- A. MLR is conducted based on a deliberate form of experimentation
- B. The Residuals from MLR analysis have to be Normally Distributed
- C. The X's (inputs) are assumed to be independent of each other
- D. It is an assumption that the X's (inputs) are not correlated to each other
Answer: A
NEW QUESTION # 160
How many experimental runs exist in a Full Factorial and fully randomized design for 4 factors with 2 replicates for the Corner Points and no Center Points? The factors in the experiment are only at 2-levels.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 161
Choose those characteristics of a Simple Linear Regression (SLR) Analysis that are applicable. (Note: There are 3 correct answers).
- A. A Correlation does not explain causation but a Regression Analysis with a statistically valid mathematical equation does explain causation
- B. General Regression Analysis deals only with Continuous Data
- C. The Correlation Coefficient is always greater than the Regression Coefficient in a SLR
- D. SLR can help quantify the significance of variation in X that influences the variation in Y via a mathematical equation
- E. Non-linear Regressions can explain curvature when with more statistical confidence than Linear Regressions
Answer: A,C,D
NEW QUESTION # 162
Perform a risk analysis to determine the expected profit or (loss) from a project which has four possible disjoint outcomes: Outcome A shows a profit of $340,000 and has a probability of 0.25 Outcome B shows a profit of $120,000 and has a probability of 0.40 Outcome C shows a loss of $40,000 and has a probability of 0.10 Outcome D shows a profit of $100,000 and has a probability of 0.25
- A. $154,000
- B. none of the above
- C. ($168,000)
- D. $520,000
- E. $130,000
Answer: A
NEW QUESTION # 163
There have been some instances in which 1.5 inch sheet metal screws are used where 1.25 inch should have been used. This produces a critical defect. The decision is made to have all 1.25 inch screws have a square reduced head and all 1.5 inch screws be Phillips. This is an example of:
- A. kanban
- B. visual factory
- C. poka-yoke
- D. standard work
- E. set up time reduction (SMED)
Answer: C
NEW QUESTION # 164
A set of data from a process has 8 readings per sample and 50 samples. The mean of the 50 sample means is 12.62. The mean of the 50 ranges is 0.18.Find the control limits for a median chart.
- A. 12.52 and 12.72
- B. none of the above
- C. 12.54 and 12.70
- D. 0.02 and 0.33
Answer: A
NEW QUESTION # 165
As a means of measuring the effects on other areas of a process as a result of changes in the primary metric we also define and track ________________.
- A. Parallel process metrics
- B. Industry standards
- C. Secondary metrics
- D. Tertiary metrics
Answer: C
NEW QUESTION # 166
An full factorial experiment has three factors. Each factor has three levels. The number of test combinations or runs is:
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: E
NEW QUESTION # 167
SCENARIO A Six Sigma team is measuring the moisture content of corn starch as it leaves the conveyer belt of a dryer. They collect one sample four cups of starch at times indicated in the chart at fixed locations labeled A, B, C, and D across the end of the belt. See the diagram below.
After some more work on the dryer, additional data are collected which when plotted looks like this:
Which type of variation dominates?
- A. hour to hour
- B. sample to sample within the hour
- C. within sample
- D. none of the above
Answer: A
NEW QUESTION # 168
For a Kanban to be successful which of these must occur?
- A. All of the above
- B. Consistent cycle times
- C. Low defect rate of incoming product or service
- D. Fairly stable process demand of product or service
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION # 169
For the data set shown here which of these statements is/are true?
- A. Grade A has a higher sample Mean than Grade B
- B. Grade A has the lowest sample Mean of the 3 samples
- C. Hypothesis Testing of Means or Medians cannot be done since there are an unequal number of observations for the 3 samples
- D. A Paired T-test would be applicable for comparing Grade B and Grade A since they follow each other in the data set
Answer: B
NEW QUESTION # 170
SWOT is an acronym for:
- A. success wields optimal teams
- B. statistics without tables
- C. strengths, weaknesses, opportunities, threats
- D. none of the above
- E. sensory Weibull ordinal tools
Answer: C
NEW QUESTION # 171
Find the value of (4) in the ANOVA table. Assume:
- A. 0.01<P<0.05
- B. 0.10<P<1
- C. 3.2
- D. 0.05<P<0.10
- E. 4.54
- F. 23.2
- G. 0.005<P<0.01
- H. 16.4
- I. 0.525
- J. 35.4
- K. 0<P<0.005
- L. 18.6
- M. 2.82
- N. 12.2
- O. 1.48
Answer: B
NEW QUESTION # 172
What dollar amount of savings would a project show if it reduced your outstanding Accounts Receivable by $0.9 million dollars to $3.5 million total and your organization's marginal cost of capital was 5.7%?
- A. $51,300
- B. $202,424
- C. $49,250
- D. $117,500
Answer: A
NEW QUESTION # 173
Find the value of (7) in the ANOVA table. Assume:
- A. 0.10<P<1
- B. 0.01<P<0.05
- C. 3.2
- D. 0.05<P<0.10
- E. 23.2
- F. 0.005<P<0.01
- G. 16.4
- H. 0.525
- I. 35.4
- J. 0<P<0.005
- K. 4.54
- L. 18.6
- M. 2.82
- N. 12.2
- O. 1.48
Answer: K
NEW QUESTION # 174
Successful Six Sigma projects always:
- A. impact the bottom line of the enterprise
- B. use designed experiments
- C. are completed in a short time frame
- D. all of the above E. none of the above
Answer: A
NEW QUESTION # 175
The Hardware Store ordered ten lawn mower from the manufacturer and just before shipping the manufacturer found one to have a motor that wouldn't start. For the manufacturer this would be categorized as what type of cost?
- A. Internal Failure Costs
- B. Appraisal Costs
- C. External Failure Costs
- D. Prevention Costs
Answer: A
NEW QUESTION # 176
......
Enhance your career with CSSBB PDF Dumps - True ASQ Exam Questions: https://testking.prep4sureexam.com/CSSBB-dumps-torrent.html