[2025] H31-341_V2.5 Actual Exam Dumps, H31-341_V2.5 Practice Test
Prep4sureExam H31-341_V2.5 dumps & HCIP Transmission sure practice dumps
Huawei H31-341_V2.5 (HCIP-Transmission V2.5) Certification Exam consists of two parts: a written exam and a lab exam. The written exam consists of 60 multiple-choice questions and has a time limit of 90 minutes. The lab exam, on the other hand, is a hands-on practical exam that tests the candidate's ability to configure and troubleshoot transmission network devices. The lab exam has a time limit of four hours and is conducted in a simulated network environment. Candidates who pass both the written and lab exams are awarded the HCIP-Transmission V2.5 certification, which is recognized globally as a mark of excellence in the field of transmission network technologies.
Huawei H31-341_V2.5: HCIP-Transmission V2.5 is an exam that focuses on the skills and knowledge required to design, implement and maintain a transmission network. It is a certification exam offered by Huawei and is aimed at individuals who wish to demonstrate their expertise in transmission network technologies. H31-341_V2.5 exam covers a wide range of topics, including network planning, network deployment, network commissioning, and network maintenance.
NEW QUESTION # 28
The network element defaults to automatic expansion of ECC communication. When the number of Huawei equipment NEs using extended ECC communication is greater than how much specified value? it is recommended to use manual extended ECC communication
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 29
The 5A deployment of OptiXtrans DC908 refers to port self-adaptation, fiber self-discovery, fiber self-discovery, wavelength self-configuration, and optical layer self-commissioning.
- A. False
- B. True
Answer: B
NEW QUESTION # 30
For non-returnable services, when the LSP is interrupted, the head node calculates an optimal path for service recovery, and then establishes a new LSP through signaling to transmit services through the new LSP. After the new LSP is established, will not delete the original LSP.
- A. False
- B. True
Answer: B
NEW QUESTION # 31
When adjusting the optical power, the flatness is a very important index. The adjustment of the flatness is generally completed through the single-channel VOA in the multiplexer board. For example, when the flatness is adjusted through the M4OV, the M40V board can detect For the input optical power of all multiplexing ports, the project can set different VOAs according to different input power values to achieve the purpose of flatness commissioning.
- A. False
- B. True
Answer: B
NEW QUESTION # 32
Dividing VLANs can prevent broadcast storms and improve network efficiency. It makes the network more secure.
- A. False
- B. True
Answer: B
NEW QUESTION # 33
Which of the following types of optical network elements defined in U2000? (Multiple choice)
- A. WDM_OADM
- B. WDM_OLA
- C. WDM_OFQ
- D. WDM_OTM
Answer: A,B,C,D
NEW QUESTION # 34
Which of the following residual dispersion values are within the dispersion tolerance of the TN52ND2 board? (Multiple choice)
- A. 700ps/nm
- B. 600ps/nm
- C. 900ps/nm
- D. 500ps/nm
Answer: A,B,D
NEW QUESTION # 35
Using the OTU board with FEC function can improve the performance of the system in many aspects. Which of the following descriptions are correct? (Multiple choice)
- A. Can balance the optical power of the system
- B. It can provide early warning of system performance degradation
- C. Can increase the length of the single span of the system
- D. Can improve the tolerance of the system to noise
Answer: B,C,D
NEW QUESTION # 36
Which of the following alarms will not be generated for the alarm?
- A. R-LOS
- B. HP-TIM
- C. TU-AIS
- D. MS-AIS
Answer: A
NEW QUESTION # 37
The EMR8 board is a fixed multiplexer/demultiplexer board, which can support up to 8 specific discontinuous wavelengths.
- A. True
- B. False
Answer: B
NEW QUESTION # 38
The OSC monitoring wavelength is 1510nm, the rate is 2Mb/s, and the receiving sensitivity can reach -48dBm.
- A. False
- B. True
Answer: B
NEW QUESTION # 39
The TOA board is an 8-way arbitrary rate service tributary processing board. Which of the following description about the TOA (STND) board is wrong?
- A. The maximum crossover capacity of a TOA board is 20 Gbit/s
- B. When the client-side service is STM-16, the port working mode is ODU1 non-aggregation mode, and there is no need to configure intra-board crossover
- C. When the service on the client side is GE, the working mode of the port is ODU0 non-aggregation mode, and the intra-board crossover needs to be configured.
- D. When the service on the client side is FE, the working mode of the port is ODU1 aggregation mode, and the intra-board crossover needs to be configured.
Answer: C
NEW QUESTION # 40
SOTU stands for Single Optical Transport Unit Interface, and MOTU stands for Multiple Optical Transport Unit Interface.
- A. False
- B. True
Answer: B
NEW QUESTION # 41
The U2000 network management system supports multiple external interfaces. Which of the following interfaces can be used when interconnecting with other manufacturers' equipment? (Multiple choice)
- A. CORBA
- B. SNMP
- C. QX
- D. MML
Answer: A,B,C,D
NEW QUESTION # 42
Among the following suggestions, which of the following protocols are related to WDM? (Multiple choice)
- A. G681
- B. G671
- C. G692
- D. G691
Answer: A,B,C
NEW QUESTION # 43
When the GE service is encapsulated into the OTN frame structure and the SDH frame structure, the alarms reported by the client-side device are different.
- A. True
- B. False
Answer: B
NEW QUESTION # 44
The setting of alarm reversal is port-based.
- A. False
- B. True
Answer: B
NEW QUESTION # 45
The functions of MG-SDH digital single-core can be expanded through software upgrades.
- A. True
- B. False
Answer: B
NEW QUESTION # 46
Which of the following descriptions about the TMB1AST2 board is wrong?
- A. Realize the sending and receiving control of two optical monitoring signals in two directions
- B. Only supports 1 channel of FE electrical signal transparent transmission
- C. It belongs to the optical monitoring channel type board
- D. Support IEEE 1588v2 synchronous clock processing function
Answer: B
NEW QUESTION # 47
......
Huawei H31-341_V2.5 certification exam consists of multiple-choice questions, and the duration of the exam is 90 minutes. Candidates are required to score at least 60% to pass the exam. H31-341_V2.5 exam covers a wide range of topics, including Optical Fiber Communication Principles, Ethernet Technology, WDM Technology, MPLS Technology, SDH Technology, and Transmission Network Planning and Design.
H31-341_V2.5 Actual Questions and Braindumps: https://testking.prep4sureexam.com/H31-341_V2.5-dumps-torrent.html